What a Roofing Lead Costs, and How to Work Out Yours
By Ali Sedighi, MBA · Last reviewed November 2026
There is no single roofing lead cost, and any figure quoted without context is of little use. What a lead costs depends on the source, the city, the season, the type of job, whether the lead is shared with other roofers and how well your own phone and estimating process convert. The number that matters is not cost per lead at all. It is cost per booked job, measured against the profit on that job. This guide explains what drives the price of a roofing lead, gives the formulas for cost per lead, cost per qualified lead and cost per booked job, walks through an example that is clearly an illustration, and shows how to set a ceiling for what you can afford to pay.
Key points
- Published averages hide large differences between cities, seasons, lead sources and job types.
- Cost per lead equals total spend on a source divided by leads received from it.
- Cost per booked job equals the same spend divided by jobs signed, and is the figure to manage.
- Your affordable lead cost depends on job profit and on how many leads you convert.
- Improving answer rate and close rate lowers cost per booked job without touching ad spend.
In this guide
- Why is there no standard price for a roofing lead?
- What drives the cost of a roofing lead up or down?
- The formulas: cost per lead, per qualified lead and per booked job
- An illustration with made-up numbers
- How much can you afford to pay for a roofing lead?
- Comparing lead sources on equal terms
- How to set up tracking and lower your cost, step by step
- Seasonal and regional effects on lead cost in Canada
- Common mistakes
- Frequently asked questions
Why is there no standard price for a roofing lead?
A lead is not a uniform product. A referral from a past customer and a form filled in by someone idly scrolling are both called leads, yet one is nearly a sale and the other may never answer the phone. A leak repair enquiry and a full replacement enquiry differ in value by a wide margin. An exclusive lead and one sold to several roofers at once are different things with the same label.
Markets differ too. A large city with many roofers bidding for the same searches has higher advertising costs than a small town. Prices rise in peak season and after storms, when every roofer wants the same callers. So an average drawn from other companies, in other places, at other times, tells you little about what you will pay. The dependable route is to measure your own.
What drives the cost of a roofing lead up or down?
Start with competition. In paid search, you bid against other roofers and against lead-selling companies, and replacement terms attract the highest bids because the jobs are large. Next is targeting: a tight service area and precise keywords cost more per click and waste less. Then comes the quality of what the click lands on. A clear page with a phone number and proof turns more visitors into enquiries, which lowers the cost of each.
Your own reputation works in the background. A profile with many recent reviews wins a larger share of the people who see it, in ads and in map results. Season and weather move everything at once. Finally, the type of lead source sets the range: referrals and organic search cost time more than money, paid search costs per click, and bought leads carry a set price whether or not anyone answers.
- Number of roofers and lead sellers advertising in your area
- Job type: repair, replacement, commercial or specialty material
- Season, weather events and time of week
- Exclusive lead versus one shared among several companies
- Landing page quality and strength of your reviews
- Size of service area and precision of targeting
The formulas: cost per lead, per qualified lead and per booked job
Three calculations cover it. Cost per lead is the total spent on a source in a period, divided by the number of leads from that source in the same period. Total spend should include advertising charges, platform or lead fees, management fees and the cost of tracking tools. If staff time is significant, add it at a fair hourly value so that so-called free sources are compared honestly.
Cost per qualified lead uses the same spend, divided only by leads that met your definition: in your area, with authority over the property and a real roofing need. Cost per booked job divides the spend by the jobs actually signed. Work each one out separately for repair and replacement, and separately for each source. Blended figures hide the fact that one source is carrying another.
- Cost per lead = total source spend divided by leads received
- Cost per qualified lead = total source spend divided by qualified leads
- Cost per booked job = total source spend divided by jobs signed
- Calculate separately by source and by repair or replacement
An illustration with made-up numbers
The following is an illustration only, with invented figures chosen to make the arithmetic easy. Suppose a roofer spends $3,000 on replacement search ads in a month, including management and tracking. Suppose those ads produce 40 enquiries. Cost per lead in this illustration is $3,000 divided by 40, which is $75. Now suppose 30 of the 40 are qualified. Cost per qualified lead is $3,000 divided by 30, which is $100.
Continuing the same illustration, suppose 20 of those 30 book an inspection, 15 receive a written estimate and 5 sign. Cost per booked job is $3,000 divided by 5, which is $600. If a second roofer in this hypothetical paid the same $75 per lead and signed only 2 jobs, their cost per booked job would be $1,500. Same lead cost, very different result. None of these figures is a benchmark. Replace every one with your own.
How much can you afford to pay for a roofing lead?
Work backwards from profit. Take the average gross profit on a job of that type, meaning the invoice less materials, labour, disposal and other direct costs. Decide what portion of that you are willing to spend to win the job while still covering overhead and leaving a net profit. That portion is your ceiling for cost per booked job. Set it separately for repairs and for replacements.
Then convert it to a lead ceiling using your close rate. If, on your records, one lead in eight becomes a signed job, your affordable cost per lead is the booked-job ceiling divided by eight. Improve the ratio to one in five and you can afford to pay more per lead than a competitor and still earn more. This is why two roofers can look at the same lead price and reach opposite conclusions.
- Average gross profit per job, by job type
- Share of that profit you will spend on acquisition
- Your leads-per-signed-job ratio from the past season
- Ceiling per lead = booked-job ceiling divided by that ratio
Comparing lead sources on equal terms
Each source reports in its own flattering way. An ad platform shows cost per conversion, where a conversion may be any call over a few seconds. A lead seller quotes a price per lead and says nothing about how many answer. Organic search and referrals look free because nobody sends an invoice. To compare them, put every source through the same three formulas using your own lead log.
Add two columns that the simple formulas miss. The first is average job value by source, since referral jobs are often larger and less price-sensitive. The second is time to close, since a source that signs in a week helps cash flow more than one that signs in two months. A source with a high cost per lead can still be your most profitable once job value is counted.
How to set up tracking and lower your cost, step by step
First, give each source its own tracked phone number and tag each web form with its source. Second, keep a lead log with date, source, job type, qualified or not, inspection, estimate value and outcome. Third, total spend by source each month. Fourth, run the three formulas. This takes an hour a month once the log is in place, and it replaces guesswork with a table you can act on.
Then work on the ratios, which is where cost comes down. Answer more calls live. Return missed calls within minutes. Book the inspection on the first conversation. Deliver a clear written estimate with photos, and follow up within two days. On the advertising side, add negative keywords, narrow the service area to where you win work and send clicks to a page about the exact service.
- Step 1: tracked number and form tag for every source
- Step 2: one lead log with source and outcome columns
- Step 3: monthly spend totalled by source
- Step 4: three formulas run for repair and replacement
- Step 5: fix the weakest step between lead and signed job
Seasonal and regional effects on lead cost in Canada
Roofing lead costs in Canada move through the year. Advertising competition is usually strongest from spring to early autumn, when every roofer is active, and after major wind or hail events. In the quiet months fewer companies advertise, which can ease costs, though fewer people are searching. Compare each month with the same month in earlier years, not with the month before, and keep at least a full year of data before drawing firm conclusions.
Regional differences are real. Large metropolitan areas in Ontario, Quebec, Alberta and British Columbia tend to have more advertisers than smaller centres in the Prairies or Atlantic Canada. Bilingual markets may need French campaigns and pages, which adds set-up cost and can open less crowded searches. When tracking calls and storing lead details, follow privacy requirements: tell callers if calls are recorded and keep personal information secure.
Common mistakes
- Comparing your cost per lead with a published average from another country, season or type of roofing work.
- Choosing the source with the cheapest leads without checking how many of them ever sign a contract.
- Leaving management fees, tracking tools and staff time out of total spend, which flatters every channel.
- Blending repair and replacement leads into one figure, hiding that they have very different values.
- Cutting a source after two weeks of data, before replacement estimates have had time to close.
Frequently asked questions
What is a good cost per lead for a roofing company?
A good cost is one that leaves an acceptable profit after the job is done, given your own close rate. That figure is different for every roofer. Calculate your ceiling from gross profit per job and your leads-per-signed-job ratio, as described above. If a source comes in under the ceiling consistently, it is working for you, whatever others pay.
Why do replacement leads cost more than repair leads?
Because the jobs are worth more, more companies compete for them and are willing to bid higher. Replacement buyers also gather several estimates, so each roofer wins a smaller share of the leads they pay for. Repair leads are cheaper and close faster but bring smaller invoices. Judge each against its own job profit instead of comparing them with each other.
Are exclusive leads worth the higher price?
Often, but test it. An exclusive lead is not being called by other roofers at the same moment, so your chance of booking the inspection is higher. Whether that justifies the price depends on the difference in close rate you actually see. Run both through the cost per booked job formula over a fixed period and let your own results decide.
How long should I track before trusting my numbers?
Repair figures settle within a month or two because jobs close quickly. Replacement figures need longer, since a lead may take weeks to sign. A full season gives a fair picture and a full year shows the seasonal swing. Small samples mislead, so avoid big decisions based on a handful of leads from any one source.
How can I lower my cost per booked roofing job quickly?
Look at conversion before spending. Listen to call recordings, measure how fast forms are answered and check how many inspections lead to a delivered estimate. Raising the share of leads that become signed jobs cuts cost per booked job at once with the same budget. After that, trim wasted ad spend with negative keywords and tighter areas.