How to Set a Construction Marketing Budget From Your Own Numbers
By Ali Sedighi, MBA · Last reviewed November 2026
Set a construction marketing budget by working backwards from the revenue you want to add, not by copying an industry rule of thumb. Decide how much new work you want from marketing, divide by your average job value to get the number of jobs, divide by your estimate-to-contract win rate to get the estimates needed, and multiply by what it costs you to generate one booked estimate. The result is a budget tied to your margins and capacity. Published averages cannot do this for you, because a firm building custom homes and a firm doing small commercial repairs have entirely different job values, sales cycles and referral flows. This guide walks through the inputs, the arithmetic and the allocation.
Key points
- Build the budget from revenue target, average job value, win rate and cost per booked estimate.
- Separate fixed foundations such as website and tracking from variable spend such as advertising.
- Check the result against gross margin so marketing cost per job leaves an acceptable profit.
- Hold back a small test reserve for trying one new channel each quarter.
- Review quarterly against booked jobs and move money toward what is producing signed contracts.
In this guide
- Why generic budget rules fail construction companies
- The inputs you need before setting a number
- The formula, step by step
- A worked example, for illustration only
- Fixed foundations versus variable spend
- How should the budget be split across channels?
- Setting it up and measuring through the year
- Canadian seasonality and the timing of spend
- Common mistakes
- Frequently asked questions
Why generic budget rules fail construction companies
The common advice is to spend a fixed share of revenue on marketing. The trouble is that construction revenue says little about what marketing needs to achieve. A contractor with a full order book from two repeat developers needs almost nothing. A firm of the same size trying to enter a new sector needs a great deal. Applying one ratio to both produces waste in the first case and failure in the second.
Revenue is also a poor base because margins vary so widely between general contracting with heavy subcontract costs and self-performed specialty work. A share of gross profit is a sounder reference point than a share of turnover. Better still is a budget built from the specific result you want. Use rules of thumb only as a sanity check after you have run your own numbers.
The inputs you need before setting a number
Gather six figures from your own records for the past year or two. You need the additional revenue you want marketing to generate, the average contract value for the type of work you are targeting, your gross margin on that work, the proportion of estimates that become contracts, the proportion of enquiries that become estimates, and your current cost to generate an enquiry by channel, if you have it.
If you lack some of these, estimate conservatively and commit to measuring them properly from now on. The win rate and enquiry-to-estimate rate are usually sitting in your estimating log. Cost per enquiry requires source tracking, which many firms have never set up. A first-year budget built on rough inputs is still far better than a guess, and it improves each quarter as real data replaces assumptions.
- Revenue you want marketing to add over the next year
- Average contract value for the work you are targeting
- Gross margin on that category of work
- Share of estimates that turn into signed contracts
- Share of enquiries that turn into estimates
- Current cost per enquiry for each channel, where known
The formula, step by step
Start at the end and work back. Jobs needed equals target revenue divided by average contract value. Estimates needed equals jobs needed divided by your win rate. Enquiries needed equals estimates needed divided by your enquiry-to-estimate rate. Variable budget equals enquiries needed multiplied by cost per enquiry. Add the fixed costs of the foundations that every channel relies on, and you have the total.
Then test the answer. Divide the total budget by jobs needed to get the marketing cost per job, and compare it with the gross profit on an average job. If marketing would consume too much of that profit, something has to change: a higher-value target, a better win rate, a cheaper channel or a smaller goal. This check is the step most owners skip, and it is the one that protects the business.
- Jobs needed equals target revenue divided by average contract value
- Estimates needed equals jobs needed divided by win rate
- Enquiries needed equals estimates needed divided by estimate rate
- Variable budget equals enquiries needed times cost per enquiry
- Total budget equals variable budget plus fixed foundation costs
- Cost per job equals total budget divided by jobs needed
A worked example, for illustration only
Suppose, purely as an illustration, a renovation contractor wants marketing to add six hundred thousand dollars of work next year and the average contract is sixty thousand dollars. That is ten jobs. Suppose the firm wins one in four estimates, so it needs forty estimates. Suppose one in two qualified enquiries leads to an estimate, so it needs eighty enquiries. If each enquiry costs an assumed two hundred dollars across channels, the variable budget is sixteen thousand dollars.
Now add an assumed fourteen thousand dollars for website upkeep, photography and tracking, giving thirty thousand in total, or three thousand dollars per job. Whether that is acceptable depends on the gross profit per job, which only the owner knows. These figures are invented to show the arithmetic and are not benchmarks. Replace every one of them with your own records before drawing any conclusion about what you should spend.
Fixed foundations versus variable spend
Some marketing costs do not rise and fall with lead volume. A sound website, hosting and maintenance, professional photography of completed projects, call and form tracking, a customer database, site signage and brand materials are needed whether you run ads or not. Fund these first. Advertising sent to a weak website with no tracking is the most common way construction firms lose money on marketing.
Variable spend is what you scale up or down: search ads, social ads, directory memberships, sponsored listings, printed mailers and event sponsorships. Because you can adjust it month by month, treat it as a dial connected to capacity. When crews are booked out, turn it down. When the schedule has gaps two or three months ahead, turn it up early enough to fill them.
- Fixed: website, hosting, maintenance and security
- Fixed: project photography and written case summaries
- Fixed: call tracking, form tracking and enquiry database
- Fixed: site signs, vehicle graphics and document templates
- Variable: paid search and paid social advertising
- Variable: directories, sponsorships, mailers and events
How should the budget be split across channels?
Allocate in order of proven return. Put the first dollars into channels with a known, acceptable cost per booked job, which for many builders means past client contact, referral partner activity and search visibility. Fund those until they stop producing additional work at a reasonable cost. Then move to the next channel. Spreading a small budget thinly over many channels means none receives enough to be judged fairly.
Keep a modest test reserve for one experiment per quarter, with a defined budget, duration and success measure agreed in advance. If the test meets the measure, it graduates into the main plan. If not, the money returns to proven channels. Do not forget people costs. If an estimator or coordinator spends a day a week on marketing tasks, that time is part of the budget.
Setting it up and measuring through the year
Put the budget into a simple monthly table with a row per channel and columns for planned spend, actual spend, enquiries, booked estimates, jobs won and contract value. Assign one person to update it. Use tracked phone numbers and form source fields so each enquiry is tagged, and have whoever answers the phone ask how the caller heard about you. Without this, the review meeting becomes a debate about opinions.
Review quarterly. For each channel, calculate cost per enquiry, cost per booked estimate and cost per job won. Because construction sales cycles are long, some jobs will be credited to spending from an earlier quarter, so look at rolling twelve-month figures as well. Shift money toward channels with a lower cost per job and investigate channels that produce enquiries but few estimates, which usually signals a targeting problem.
- Create a monthly table with one row per channel
- Tag every enquiry with a source at first contact
- Record estimates booked and jobs won against each source
- Calculate cost per estimate and per job each quarter
- Reallocate toward the lowest cost per job won
Canadian seasonality and the timing of spend
An even monthly budget rarely suits a Canadian builder. Owners plan through the winter and want to start when the ground allows, so the marketing that fills the spring schedule has to run in the colder months. Weight advertising and outreach toward the planning period ahead of your busy season, and reduce variable spend once crews are committed. Interior work can be promoted to fill winter gaps.
Conditions differ by region. Frost depth, snow load, rainfall and the length of the building season vary between provinces, and so does the timing of demand. If you serve French-speaking clients, allow for translation and bilingual materials in the fixed costs. Include the administrative effort of handling consent and privacy properly for email and text marketing, since compliant list management takes time that should be counted.
Common mistakes
- Copying a revenue ratio from an article without checking it against your own job values and margins.
- Spending on advertising before fixing the website and tracking that every enquiry passes through.
- Dividing a small budget across six channels so that none gets enough to prove itself.
- Cutting all marketing when crews are busy, then restarting from nothing when the schedule empties.
- Counting only invoices from outside suppliers and ignoring the staff hours spent on marketing tasks.
Frequently asked questions
What share of revenue should a construction company spend on marketing?
There is no single correct ratio, and published figures vary too widely to rely on. A firm with strong repeat clients may need very little, while one entering a new market needs much more. Calculate from your revenue goal, average job value, win rate and cost per enquiry, then check the result against gross profit per job. That figure is yours.
We get most work from referrals. Do we need a marketing budget at all?
Yes, though it may be small. Referrals depend on relationships that need attention, and people who are referred still look you up online before calling. Budget for the things that support referrals: a current website with recent projects, good photography, reviews, and time set aside for contact with past clients and partners. That protects the source you already depend on.
How do I budget when I do not know my cost per lead?
Start with a test. Set aside a fixed amount for one channel over two or three months, track every enquiry it produces, and calculate the cost per enquiry and per booked estimate from the result. Use that as your first input. It will be rough, but it is real, and each following quarter makes the number more dependable.
Should the budget change during the year?
The total can stay fixed while the monthly distribution moves. Increase variable spend ahead of periods when you want to book work and reduce it when capacity is full. Review quarterly and reallocate between channels based on cost per job won. Avoid stopping completely, because search visibility, audience familiarity and partner relationships decay faster than most owners expect.
Is hiring a marketing person part of the marketing budget?
It should be. Salaries, the time estimators and owners spend on marketing, software subscriptions and outside specialists are all costs of generating work. Leaving them out makes channels look cheaper than they are. When comparing an in-house hire with outside help, include wages, benefits, management time and tools on one side, and fees plus your coordination time on the other.